Runxin 55504 - Page 3

MODEL：F67Q/F71Q/F68Q/F69Q/F116Q/F117Q
Parameter Unit
Factory
Default
Actual
Value
Control Mode A-01/02 (Q3 meter
type available)
/ A-01
Unit Mode HU-1/2 (Q3 meter type
available)
/ HU-1
Water Treatment Capacity (Q3
meter type available)
m3 10
Service Days (Time type by day)
D.
03
Regeneration Time / 02:00
Backwash Interval Times
(F68Q/F69Q available)
/ F-00
Rinsing Frequence (F67Q/F71Q
available)
/ F-00
Backwash Time min. 10
Brine & Slow Rinse Time
(F67Q/F71Q unavailable)
min. 60
Brine Refill Time
(F67Q/F71Q unavailable)
min. 05
Fast Rinse Time min. 10
Interval Regeneration Days
(Q3 meter type available)
D 30
Output Mode b-01(02)
/
b-01
 If there is no special requirement when product purchase, F68Q is
without the drain line flow control，and choose 8# injector as the
standard configuration. We choose 8468077 drain line flow control，
and 4# injector for F69Q as standard configuration. F116Q is without
the drain line flow control，and choose 9# injector as the standard
configuration. We choose 8468062 drain line flow control，and 7#
injector for F69Q as standard configuration.