Runxin F63C1 - The Program Type Setting (Operation by Professional); Softener System Configuration; Parameter Set

MODEL 63504-F63C1/63604-F63C3/73504-F68C1/73604-F68C3
Before the valve put into use, please fill in the below content so as to
help us to refer in the future.
The Program Type Setting (Operation by professional)
When all symbols light no, press and hold and buttons for 5
seconds to enter the menu of valve model selection. Please set the
program type in accordance with the product type. (Time clock type
by days or hours or Meter type)；for example，F63C1 or F63G1 should be
set to F63B1; F63C3 or F63G3 should be set to F63B3. You couldn’t set
to other type.)
Softener System Configuration
Tank Size：Dia. mm，Height mm；
Resin Volume L；Brine Tank Capacity L；
Hardness of Raw water mmol/L；
Pressure of Inlet Water MPa；
Control Valve Model ；Number ；
The Specification of Drain Line Flow Control ；
Injector No. .
Water Source: Ground-water□ Filtered Ground-water □Tap Water □
Other .
Parameter Set
Parameter
Unit
Factory
Default
Actual Value
Control Mode A-01（02，03，
04）
/
A-01
Unit Mode HU01（02，03）
/
HU01
Water Treatment Capacity
（Meter type）
m
3
80
Service Days（Time of clock
type, by days）
D.
03