Runxin F63C3 User Manual

MODEL 63504-F63C1/63604-F63C3/73504-F68C1/73604-F68C3
7
1.3. Service Condition
Runxin Valve should be used under the below conditions:
Items
Requirement
Working
conditions
Water pressure
0.15MPa～0.6MPa
Water temperature
5℃～50℃
Working
environment
Environment
temperature
5℃～50℃
Relative humidity
≤95% （ When temperature is
25℃）
Electrical facility
AC100～240V/50～60Hz
Inlet water
quality
Water turbidity
Down-flow regeneration＜5FTU；
Up-flow regeneration＜2FTU
Water hardness
First Grade Na
+
＜6.5mmol/L；
Second Grade Na
+
＜10mmol/L
Free chlorine
＜0.1mg/L
Iron
2+
＜0.3mg/L
CODMn
＜2mg/L（O
2
）
In the above table, First Grade Na+ represents First Grade Na+
Exchanger. Second Grade Na+ represents Second Grade Na+
Exchanger.
 When the water turbidity exceeds the conditions, a filter should be
installed on the inlet of control valve.
 When the water hardness exceeds the conditions, the outlet water
hardness will hardly reach the requirement of boiler feed water（0.03
mmol/L）. It is suggested to adopt second grade softener.

Runxin F63C3 Specifications

General

Brand	Runxin
Model	F63C3
Category	Control Unit
Language	English