Runxin F63C3 User Manual

MODEL 63504-F63C1/63604-F63C3/73504-F68C1/73604-F68C3
14
⑥ Connect brine tube
a.As Figure1-5 shows, slide 3/8″brine tube hose connector over end of
brine tube.
b.Insert tube bushing into the end of brine tube.
c.Insert the red brine line flow control into valve brine line
connector(Attention: cone side of control should face into valve)
d.Tighten brine draw hose connector onto brine line connector.
e.Connect the other end of brine tube with the brine tank. (The liquid
level controller and air-blocker should be installed in the brine tank.)
Remark: The brine tube and drain pipeline should not be bended or
plugged.

Runxin F63C3 Specifications

General

Brand	Runxin
Model	F63C3
Category	Control Unit
Language	English