MODEL 63504-F63C1/63604-F63C3/73504-F68C1/73604-F68C3
2
50℃,water pressure 0.15～0.6MPa. Failure to use this product under
such conditions voids the warranty.
If the water pressure exceeds 0.6Mpa, a pressure reducing valve
must be installed before the water inlet. While, if the water pressure
under 0.15MPa, a booster pump must be installed before the water inlet.
It is suggested to install PPR pipe, corrugated pipe or UPVC pipe,
instead of TTLSG pipe.
Do not let children touch or play, because careless operating may
cause the procedure changed.
When the attached cables of this product and transformer are changed,
they must be changed to the one that is from our factory.
To Next Page
Loading...
Need help?
General
