RUSH MH 1 Profile Plus User Manual 11
4. Fasten the brackets A to the base of the fixture
using their quarter-turn fasteners. Turn the
quarter-turn screws a full 90° to lock them.
5. Working from a stable platform, hang the fixture on
the truss and tighten the rigging clamps onto the
truss.
6. Secure the fixture with a safety cable as directed below.
7. Check that the head will not collide with other fixtures or objects.
Securing with a safety cable
Secure the fixture with a safety cable
(or other secondary attachment) that
is approved for the weight of the
fixture so that the safety cable will
hold the fixture if a primary
attachment fails. Loop the safety
cable through the cutout in the
fixture’s baseplate (arrowed in
illustration on right) and around a
secure anchoring point.
Martin™ can supply suitable safety
cables and rigging clamps (see
‘Accessories’ on page 40).
To Next Page
Loading...
