Rush Wizard - Linking Fixtures to Power in a Chain

RUSH Wizard User Manual 15
Linking fixtures to power in a chain
If you obtain a 14 AWG / 1.5 mm
2
power input cable and 14 AWG / 1.5 mm
2
throughput cables from Martin™ (see ‘Accessories’ on page 47), you can
relay mains power from one fixture to another by connecting fixtures to power
in a linked daisy-chain, MAINS OUT throughput socket to MAINS IN input
socket.
Using 14 AWG or 1.5 mm
2
cables from Martin™, you can link:
• Maximum six (6) RUSH Wizard fixtures to power in a chain at 100-120 V,
or
• Maximum twelve (12) RUSH Wizard fixtures to power in a chain at 200-
240 V.