Rush Wizard - Fixture Settings; Fixture Test; Lamp Settings

24 RUSH Wizard User Manual
3. Press ENTER to confirm (or press MENU to exit without making a
change).
Automatically turn off display backlight
By default the display is lit when power is applied to the fixture. It can be set to
automatically dim when the control panel has not been used for a period:
1. Select BACK LIGHT and press ENTER to confirm.
2. Use the DOWN and UP buttons to select OFF (display goes into sleep
mode) or ON (display remains lit constantly)
3. Press ENTER to confirm (or press MENU to exit without making a
change).
Fixture settings
Pan Reverse
To adjust the pan settings:
1. Select PAN REVERSE and press ENTER to confirm.
2. Use the DOWN and UP buttons to select YES (pan inversion) or NO (pan
normal).
3. Press ENTER to confirm (or press MENU to exit without making a
change).
Fixture test
Automatic tests of all functions can be run from the control menus.
Auto test
To perform a complete test of all of the fixture functions:
1. Select AUTO TEST and press ENTER to confirm. The fixture will run the
auto test routine.
2. Press MENU to stop the test and exit.
Lamp settings
Lamp On/Off
To manually power the lamp on or off:
1. Select LAMP ON/OFF and press ENTER to confirm.