1.7 )Door Lock Group
a) Remove control panel group. ( see 1.6)
b) Remove two screws that fix the door lock
group.
1.8 ) Dispanser
a) Remove the front panel ( see 1.2 )
b) Remove the wire.
c) Remove dispanser from inside door‘s
hinges by using slotted screwdriwer.
d) Push and remove the dispanser .
Warning : use work glovers otherwise İnside door iron sheet can cut your
hands.
1.9 ) Door Inside
a) Remove side panels. (see 1.4 )
To Next Page
Loading...
