ADJUSTING THE WATER HARDNESS
First of all be sure that the machine isn’t in operation
1- Move the programme selector knob to the 0 (Reset) position
while your machine is not in operation.
2- After this operation press the Start/Pause button and keep it
pressed down
3- Meanwhile, energise the machine by pressing the Power On/Off
button
4- Keep the start/pause button pressed until the flow indicators are
on and off. It takes ~5"
- Your machine displays the latest entered water hardness setting.
Water hardness can be adjusted by pressing start/pause button according to Table of Water Hardness
Level Settings.
- After adjusting the water hardness level , press on/off button to save settings in memory.
To Next Page
Loading...
