RUTHMANN Steiger TB270 - Page 54

2 Technical Specifications
2-4
RUTHMANN-Steiger
®
TB270
BA.GB.12-27409-05-07-FTA-jr
2.1.2.2 Stabilizing jacks
Kind of jacks
front: horizontal-vertical-
jacking
rear: horizontal-vertical-
jacking
Jacked width with fully extended jacks
(outer edge of jack plates)
front: approx. 3,52 m
rear: approx. 3,31 m
Jacked width with unilaterally extended
jacks within vehicle profile (outer edge of
jack plates)
front: approx. 2,83 m
rear: approx. 2,72 m
Jacked width with jacks extended on both
sides within vehicle profile (from outer
edge of jack plates)
front: approx. 2,13 m
rear: approx. 2,13 m
Supporting forces on surface
(horizontal positioned, even lifted vehicle)
front left: 29 kN
front right: 29 kN
rear left: 19 kN
rear right: 19 kN
2.1.2.3 Boom
Boom execution
5-fold-telescopc-lifting arm
Telescopic extension
approx. 16,60 m (synchro-
mesch)
Angle of elevation
approx. 79°
Range of rotation of boom
(with full jacking)
approx. 2 x 225°