Push function, possibility to bridge
the safety cut-out by a „conditional
emergency cut-off“. First the tele-
scope should then be retracted.
- Emergency operation, misusage is
strictly forbidden! -
Blinking light:
- Blinks if a fault is existent („Restric-
ted Steiger-operation“).
- Blinks in turn with the warning lamp
„LML-Cut-off“, if the computer con-
trol has switched-over to „Emergen-
cy Cut-Off“
Continuous sounding:
- Push button „Bridge safety cut-out“
is activated, even though there is no
„partly Emergency Cut-Off“.
- Battery’s voltage (distribution volt-
age) too low, start engine.