HEAVY DUTY
SOD CUTTER
40
ROLLING RAM ACCESSORY: P/N 545395
For conversion of Walking Ram to Rolling Ram,
two accessories need to be used. Accessory part
number 545395 Rolling Ram, MUST BE used with
Accessory part number 545505 Sulky Roller.
This accessory allows the cut-off blade to pull the
edge of the sod up, creating a lip for the Sulky Roller
to catch on. This lets the primary rack grab the edge
of the sod and begin the rolling process.
EXISTING
HARDWARE
EXISTING
HARDWARE
PART NUMBER DESCRIPTION QTY
521481 SEAL, FELT 2
521482 WASHER, THRUST 2
521483 PIN, ROLLER 1
521484 ROLLER 1
SOD HOLD-DOWN SKID: P/N 545637
Under certain (extremely dry) conditions, the sod will
have a tendency to buckle up directly behind the cut-
ting blade. The hold-downs mount between the side
arms to prevent this.
1
2
3
5
6
7
PART NO. DESCRIPTION QTY
1 515011 SCREW, 5/16-24X1 6
2 520176 FINGER, SOD 2
3 520177 BRACKET, RH 1
4* 520178 BRACKET, LH 1
5 64139-04 BLT-WLF 1/4-20 X 3/4 4
6 64141-1 NUT-WLF 5/16-24 6
7 64141-2 NUT,1/4-20 FLGLOCK 4
*NOT ILLUSTRATED
ACCESSORIES
To Next Page
Loading...