SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOLS DESIGNATION / EXPLANATION
Precautions that involve your safety.
To reduce the risk of injury, user must read and understand operator’s manual before using this
product.
Always wear eye protection with side shields marked to comply with EN 166 as well as hearing
and head protection when operating this equipment.
No smoking, sparks, or open ame.
Hold and operate the saw properly with both hands.
Do not operate the saw using only one hand.
Engines produce carbon monoxide which is an odorless, deadly poison. Do not operate in an
enclosed area.
Danger! Beware of kickback.
Avoid bar nose contact.
Wear non-slip, heavy-duty protective gloves when handling the chainsaw.
Figure 62
92. Chain brake
5. Chain lubricant cap
16. Fuel cap
93. Post
94. Starter cover
104. T25 Torx Screwdriver
Figure 63
95. Clean Engine fins
Figure 64
96. Clean flywheel fins
Figure 65
97. Fuel filter
Figure 67
98. Deflector
99. Deflector retaining nut
100. Spark arrestor
103. Gasket
20. Silencer
101. Bumper spike bar
102. Bolt & nut
Figure 68
24. Clean the chain brake
To Next Page
Loading...
Need help?
General
