EasyManua.ls Logo

Ryobi TC401 User Manual

Ryobi TC401
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
4 in. WET/DRY TILE SAW
SCIE À CARREAUX À SEC/SOUS
EAU DE 105 mm (4 po)
SIERRA DE LOSAS PARA TRABAJOS
EN HÚMEDO/SECO de 105 mm (4 pulg.)
TC401
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
INCLUDES: Wet/Dry Tile Saw, Diamond
Cutting Wheel, Arbor Wrenches (2), Water
Supply Hose, Faucet Adaptor, Operator’s
Manual
TABLE OF CONTENTS
****************
General Power Tool Safety
Warnings .........................................2-3
Tile Saw Safety Warnings ................3-5
Symbols ..............................................6
Electrical ..........................................7-8
Features ..............................................8
Assembly .......................................9-10
Operation .....................................10-12
Maintenance ..................................... 13
Illustrations ..................................15-17
Parts Ordering / Service ..... Back Page
INCLUT : Wet/Dry Tile Saw, Diamond
Cutting Wheel, Arbor Wrenches (2), Water
Supply Hose, Faucet Adaptor, Operator’s
Manual
TABLE DES MATIÈRES
****************
Avertissements généraux de sécurité en
ce qui a trait aux outils électriques...... 2-3
Avertissements de sécurité en ce qui a
trait à la scie à carreaux ..................3-5
Symboles ............................................6
Caractéristiques électriques ............7-8
Caractéristiques .................................8
Assemblage ...................................9-10
Utilisation .....................................10-12
Entretien ...........................................13
Illustrations ..................................15-17
Commande de pièces /
réparation ..........................Page arrière
INCLUYE: Wet/Dry Tile Saw, Diamond
Cutting Wheel, Arbor Wrenches (2), Water
Supply Hose, Faucet Adaptor, Operator’s
Manual
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad generales para
el uso de herramientas eléctricas .........2-3
Instrucciones de seguridad para
operaciones con discos de trocear
abrasivos .........................................3-5
Símbolos ............................................6
Aspectos eléctricos .........................7-8
Características ...................................8
Armado ..........................................9-10
Funcionamiento ...........................10-12
Mantenimiento ..................................13
Ilustraciones ................................15-17
Pedidos de piezas /
servicio .......................... Pág. posterior
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
RESET
TEST
RESET
TEST
RESET
TEST
45
30
Question and Answer IconNeed help?

Do you have a question about the Ryobi TC401 and is the answer not in the manual?

Ryobi TC401 Specifications

General IconGeneral
BrandRyobi
ModelTC401
CategorySaw
LanguageEnglish

Summary

General Power Tool Safety

Electrical Safety

Precautions to prevent electric shock and related hazards.

Personal Safety

Recommendations for user protection and alertness during operation.

Abrasive Cutting-Off Operations Safety

Kickback and Additional Safety Rules

Kickback Prevention

Explanation of kickback and techniques to avoid it.

Electrical

Ground Fault Circuit Interrupter (GFCI)

Information on the GFCI plug, its function, testing, and importance.

Assembly

Operation

Starting, Stopping, and Lock-On

Procedures for starting, stopping the saw, and using the lock-on feature.

Cross Cut Operation

Detailed steps for performing a straight 90° cut on the material.

Diagonal and Miter Cut Operation

Guidance on making angled cuts, including diagonal and miter cuts.

L-Cut and Bevel Cut Operation

Instructions for making L-shaped cuts and angled bevel cuts.

Maintenance

Related product manuals