EasyManua.ls Logo

Ryobi TSS120L User Manual

Ryobi TSS120L
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
12 in. SLIDING COMPOUND
MITER SAW WITH LASER
DE 305 mm (12 po) SCIE À ONGLETS
COMBINÉS COULISSANTE AVEC
LASER
SIERRA INGLETEADORA
COMPUESTA DESLIZANTE DE
305 mm (12 pulg.) CON GUÍA LÁSER
TSS120L
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
General Safety Rules .......................2-3
Specific Safety Rules ......................3-4
Symbols ..............................................5
Electrical ............................................. 6
Glossary of Terms ...............................7
Features .........................................8-11
Tools Needed ...................................12
Loose Parts List ................................12
Assembly .....................................13-22
Operation .....................................23-32
Adjustments ................................33-34
Maintenance ..................................... 35
Parts Ordering / Service ..... Back Page
TABLE DES MATIÈRES
****************
Règles de sécurité générales ..........2-3
Règles de sécurité particulières ......3-4
Symboles ............................................5
Caractéristiques électriques ...............6
Glossaire .............................................7
Caractéristiques ............................8-11
Outils nécessaires ............................12
Liste des pièces détachées ..............12
Assemblage .................................13-22
Utilisation .....................................23-32
Réglages ......................................33-34
Entretien ...........................................35
Commande de pièces /
réparation ..........................Page arrière
ÍNDICE DE CONTENIDO
****************
Reglas de seguridad generales .......2-3
Reglas de seguridad específicas ....3-4
Símbolos ............................................5
Aspectos eléctricos ............................ 6
Glosario de términos ..........................7
Características ..............................8-11
Herramientas necesarias ..................12
Lista de piezas sueltas .....................12
Armado ........................................13-22
Funcionamiento ...........................23-32
Ajustes .........................................33-34
Mantenimiento ..................................35
Pedidos de piezas /
servicio .......................... Pág. posterior
Question and Answer IconNeed help?

Do you have a question about the Ryobi TSS120L and is the answer not in the manual?

Ryobi TSS120L Specifications

General IconGeneral
TypeSliding Compound Miter Saw
Motor Power15 Amp
Voltage120 V
Power SourceCorded Electric
Cutting Capacity12 in.
Weight45 lb
Arbor Size1 inch
Amperage15 A
Cutting Depth at 90°3-1/2 inches
Blade Diameter12 in
Bevel Capacity45° left and right

Summary

GENERAL SAFETY RULES

Personal Protective Measures

Wear appropriate safety gear including eye protection, clothing, and hearing protection.

Safe Operation Practices

Follow safe work habits, tool maintenance, and proper starting procedures.

SPECIFIC SAFETY RULES

Maintain Safe Cutting Zones

Keep hands clear of the blade path and avoid reaching around the saw blade.

FEATURES

ASSEMBLY

Unpacking and Initial Inspection

Steps for safely unpacking the saw and checking for damage or missing parts.

Installing or Replacing the Blade

Detailed steps for safely removing and installing the saw blade.

Laser Guide Alignment

Procedure for aligning the laser guide line with the saw blade for accurate cuts.

Squaring Blade to Miter Table

Steps to ensure the saw blade is perpendicular to the miter table for accurate cuts.

Mounting the Saw

Instructions for securely mounting the miter saw to a workbench or stand.

Squaring Blade to Fence

Steps to ensure the saw blade is perpendicular to the fence for accurate cuts.

OPERATION

General Operation Warnings

Important safety reminders before starting any cutting operations.

Performing Compound Miter Cuts

Guide for making cuts with both miter and bevel angles simultaneously.

Cutting Safety Precautions

Specific safety advice related to workpiece handling and tool use during cuts.

ADJUSTMENTS

Adjusting the Laser Guide

Procedure for calibrating the laser guide for accurate cut alignment.

MAINTENANCE

Related product manuals