118 Instruments and controls
Range
Range is calculated from current fuel
tank content and current consump‐
tion. The display shows average val‐
ues.
After filling the tank, the range is up‐
dated automatically after a brief de‐
lay.
When the fuel level in the tank is low,
a message appears in the Driver In‐
formation Center (DIC) and in the
Info-Display.
Additionally the control indicator Y in
the fuel gage illuminates.
Average consumption /
Instantaneous consumption
Display of average consumption and
instantaneous consumption. The
measurement of average consump‐
tion can be reset at any time.
To reset, press the SET/CLR button
for a few seconds.
Bio Power
Indicates the current percentage of
ethanol E85 in the fuel tank.
Average speed
Display of average speed. The mea‐
surement can be reset at any time.
To reset, press the SET/CLR button
for a few seconds.
Distance and estimate time of
arrival
Display of distance and accordant ar‐
rival time. The measurement can be
reset at any time.
To use the Distance function and get
a calculated Estimate time of arrival,
press SET/CLR button shortly and
turn the adjuster wheel to set the dis‐
tance to the destination.
Press SET/CLR button to show esti‐
mate time of arrival.
Estimate time of arrival is updated
during the journey based on the aver‐
age speed since Distance was set.
When distance reaches zero, the
function acts as trip meter. The trip
meter starts from the distance, that
was set previously.
To reset all values, press the SET/
CLR button for a few seconds.
Navigation
Display of additional route guidance
and hints to the navigation system.
"Blank page"
indicates no further content except
kilometer/mileage.
To Next Page
Loading...
