196 Vehicle care
3. Rotate bulb holder counterclock‐
wise to disengage. Withdraw the
bulb holder from the housing.
4. Disengage clips on the connector
and take off the plug connector
from the bulb.
5. Insert the new bulb, engaging the
two lugs into the reflector and ro‐
tate clockwise.
6. Clip on and engage connector to
the bulb.
7. Mount the cover plate with
3 screws.
Taillamps
Sedan
1. Release cover and remove.
2. Unscrew three plastic securing
nuts from the inside by hand.
To Next Page
Loading...
