Keys, doors and windows 35
Close or open the sunblind by press‐
ing button H or G.
General hints
Function standby
Switch on ignition to operate the
moonroof or sunblind.
Safety function
If the moonroof or sunblind encoun‐
ters resistance during automatic clos‐
ing, it is immediately stopped and
opened again.
Override safety function
In the event of closing difficulties due
to frost or the like, hold the switch
r pressed. The moonroof closes
without safety function. To stop
movement, release the switch.
Initializing of the roof
If the moonroof cannot be closed (e.g.
after disconnecting the vehicle bat‐
tery), activate the moonroof electron‐
ics as follows:
■ If moonroof is closed, keep the
switch r pressed for
10 seconds.
■ If moonroof is open, keep the
switch r pressed until moonroof
is fully closed. Then release switch
shortly and press it again for
10 seconds.
Relearning of safety function
If the moonroof does not close cor‐
rectly after initializing:
1. Open moonroof fully by pressing
switch p.
2. Release switch and then press
again switch p gently to the first
detent for approx. 30 seconds.
Then close moonroof by pressing
switch r until the moonroof is
fully closed.
Initializing and relearning of the
power operated sunblind
Repeat the previous steps using the
switches H for closing and G for
opening.
To Next Page
Loading...
