English
5
19
The Manufacturer declines
any liability for any damage
to the vending machine, to
property and/or injury to
persons, caused by the
installation of the payment
system. The responsibility
falls to the person who
carried out the installation.
5.5 Connection to the electric
network
The Maintenance Technician,
who is responsible for the
installation of the vending
machine, must ensure that:
• the electric system complies with current safety regulations;
• the supply voltage corresponds to that indicated on the data plate.
If in doubt, do not proceed
with the installation and ask
qualified and authorized
personnel to check the
system accurately.
The vending machine is equipped with a power cord which must be
plugged into the appropriate socket on the vending machine back panel.
Do not use adapters or multi-sockets.
Make sure that the electrical
plug is easily accessible even
after installing the machine.
To Next Page
Loading...
