MAGIC 3. OPERATION
Saeco International Group REV.5 SEPT.2004 Page 3/14
2. Operation ( Magic Collection new, Magic de luxe 2, Magic de luxe RD)
2.1. Operating instructions (quick reference)
Action
Comments
Temperature
LED
Getting started
1 Unpack machine.
Check for damage.
2 Fill water tank.
3 Fill coffee beans container.
4 Connect mains plug.
5 Turn on main switch.
OFF
6 De-aerate water circuit.
Open hot water pressure valve
until water flows.
OFF
Heating stage (approx. 80 sec.)
OFF
Ready
ON
Making coffee
7 Programme coffee quantity for
each selection button.
• Expresso lungo
• Coffee
• Expresso
Depending on cup size.
Programme by keeping the
coffee selection button pressed
until the desired quantity is
reached.
ON
8 Place cup under dispenser.
ON
9 Elect programme and press
appropriate button.
Press once = 1 cup of coffee.
Press twice = 2 cups of coffee.
(The button LED flashes once
or twice during brewing
depending on selection)
Press button again to terminate.
ON
Dispensing steam
10 Press steam button.
Heating stage.
OFF
11 Ready
ON
12 Steam dispensing
Open HWS valve
To warm coffee.
To froth milk.
ON
13 Press steam button / deactivate
steam function.
Cooling stage (can be
accelerated by de-aerating)
FLASHES
Over-heating
De-aerate
FLASHES
Ready (to make coffee)
ON
Cleaning
Empty dregs drawer
Storage capacity of 30 tablespoons (Reset - empty only when
indicated)
Empty drip tray
After 30 servings
Clean water tank.
As required.
Clean coffee bean container.
As required.
Clean the housing.
As required.
Rinse brewing unit
1 x per week
Clean brewing unit and
clean oil filer(s).
1 x per month
Descaling
Depending on water hardness.
To Next Page
Loading...
