Saeco MAGIC ROMA - Page 26

3. OPERATION MAGIC
Page 10/14 REV.5 SEPT.2004 Saeco International Group
4. Operation (Magic Comfort +, Magic Comfort + RD)
4.1. Operating instructions (quick reference)
Action Comments Display
Getting started
1 Unpack machine. Check for damage.
2 Fill water tank.
3 Fill coffee beans container.
4 Connect mains plug.
5 Turn on main switch. Self test/
Heating
6 De-aerate water circuit. Press hot water button. Heating
Heating stage (approx. 80 sec.) Heating
Ready Select product
Ready for
operation
Making coffee
7 Programme coffee quantity for
each selection button.
• Expresso lungo
• Coffee
• Expresso
Depending on cup size.
Programme by keeping the
coffee selection button pressed
until the desired quantity is
reached.
Quantity
programme
8 Place cup under dispenser. Select product
Ready for
operation
9 Select programme and press
appropriate button.
Press once = 1 cup of coffee
Press twice = 2 cups of coffee.
1 Coffee
2 Coffees
Dispensing steam
10 Steam dispensing.
Open HWS valve
To warm coffee.
To froth milk.
Steam
Hot water
11 Hot water Press the hot water button
briefly to start hot water
dispensing; press again to stop.
Hot water
16 Hot water quantity
programming
Keep the hot water button
pressed for the desired time.
The last programme entered is
saved (only when hot water is
activated in the user
programme).
Hot water
Quantity
programme
17 Hot water
Quantity programme
The last programme saved is
activated by pressing the hot
water button briefly.
Hot water