5. SERVICE PROGRAMME MAGIC
Page 4/24 REV.5 SEPT.2004 Saeco International Group
Funktion Einstellbereich Schrittweite Bemerkung
GRINDS COUNTER
Number
0-50 +/-1 Counts number of coffee cycles.
When this value reaches the
Grinds Stop value, "GRINDS
CONTAINER EMPTY" will be
displayed. (Reset by removing
dregs drawer for emptying - min.
6 sec.)
GRINDS MAXIMUM
30
5-50 +/-1 Number of cycles until "EMPTY
GRINDS CONTAINER" is
displayed.
--TOTAL COFFEE--
CYCLES Number
--------------------- ------------------
-----
Total number of coffee cycles -
not resettable.
--TOTAL WATER--
(ml) Number
--------------------- ------------------
-----
Total water flow volume (in ml) /
not resettable
WATER DESCALING
(ml)
--------------------- ------------------
-----
Total water flow (in ml) since last
descaling / resettable
HOT WATER FLOW
(L/H) 20
6 - 34 1/h +/- 2 1/h The pump delivery rate for hot
water can be expressed in litres
per hour.
--HOT WATER---
PUMP ADJUST. 63000
58,000 - 65,500 +/- 1 The pump delivery rate is
adjusted in relation to the HOT
WATER FLOW setting by means
of a phase controlled modulator.
Pump tolerances can thus also be
adjusted. An equivalent value is
saved under HOT WATER
PUMP ADJUSTMENT.
DESCALING---
FLOW (L/H) 8
6 – 34 1/h
+/- 2 1/h The flow rate for the descaling
programme is limited to 8 L/h.
--DESCALING---
PUMP ADJUST. 61000
58,000 – 65,500
+/- 1 Pump adjustment as with hot
water.
MACHINE STATUS
0 – 255
160
--DATE OF MANUF---
DAY
--------------------- ------------------
-----
--DATE OF MANUF---
MONTH
--------------------- ------------------
-----
--DATE OF MANUF---
YEAR
--------------------- ------------------
-----
This date indicates the date on
which the machine was
manufactured. This date cannot
be changed, printed.