39
Remove the cappuccinatore.
THOROUGH MAINTENANCE OF THE CAPPUCCINATORE
Thoroughly wash the cappuccinatore at least once a week.
The components should be hand-washed with household detergents.
Separate the upper part of the
cappuccinatore from the lower
part.
Remove the regulator.
Remove the cap from the lower
part.
Wash all components. Make sure
that the hole is clean and
unobstructed.
Reassemble the components and
install the cappuccinatore in the
container.
Remove the O-ring with a pointy
object.
Insert the new O-ring pressing it
delicately.
Assemble the upper and lower
part of the cappuccinatore.
O-RING REPLACEMENT
When the upper and lower parts of the cappuccinatore move too freely, replace the O-ring with the ones
supplied.
1 2 3
4 5 6
1 2
3
To Next Page
Loading...
