Safewatch QuickConnect Plus - Page 13

- 13 -
✻
✻✻
✻56 ENHANCED ZONE PROGRAMMING PROCEDURE
1
11
1C
CC
C
ZONE DESCRIPTOR
ZONE DESCRIPTORZONE DESCRIPTOR
ZONE DESCRIPTOR
Voice Descriptor
0 = Skip to next zone (A)
1 = Enter descriptor mode (existing zone descriptor will be announced, then descriptor 1
will be repeated)
1
11
1d
Note: System displays 2-digit
selection & alpha
descriptor OR 99 “No
selection”
Descriptor 1
Enter [#] + 2-digit vocabulary index† number of first descriptor word for this zone.
To change the entered index number, press [#] + desired index number.
6 = accept word and advance to descriptor 2 (descriptor 2 will be announced)
8 = accept word and advance to next zone (prompt A) – zone descriptor will be
announced
Press any other key to repeat the selected word
1
11
1E
EE
E
Note: System displays 2-
digit selection & alpha
descriptor OR 99 “No
selection”
Descriptor 2
Enter [#] + 2-digit vocabulary index† number of second descriptor word for this zone.
To change the entered index number, press [#] + desired index number.
6 = accept word and advance to descriptor 3 (descriptor 3 will be announced)
8 = accept word and advance to next zone (prompt A) – zone descriptor will be
announced
Press any other key to repeat the selected word
1
11
1F
FF
F
Note: System displays 2-
digit selection & alpha
descriptor OR 99 “No
selection”
Descriptor 3
Enter [#] + 2-digit vocabulary index† number of third descriptor word for this zone.
To change the entered index number, press [#] + desired index number.
6 or 8 = accept word and advance to next zone (prompt A) – zone descriptor will be
announced
Press any other key to repeat the selected word
† See ✻ 84 ASSIGN ZONE VOICE DESCRIPTORS section for Vocabulary Index.