Regular Coffee Preparation
1
Fill the water tank
with potable water.
3
Place a cup under the
coffee outlet. Use the cup
support if required. PUSH
the cup support to unlock.
2
Turn the machine ON by
pressing Ristretto, Espresso,
Lungo, or Steam button. The
buttons will flash while the
machine heats up. Heating up
takes approximately 3 seconds.
4
Lift the Lever, insert a capsule and close the lever.
Press one of the coffee buttons to extract.
Ristretto (25 ml / 0.85 fl.oz)
Espresso (40 ml / 1.35 fl.oz)
Lungo (110 ml / 3.7 fl.oz)
To ensure hygienic conditions, it is highly
recommended to not reuse a used capsule.
5
Preparation will stop automatically
or press the coffee button before
completing the extraction, to stop the
coffee flow.
To Next Page