INSTALLATION MANUAL
page 30 / 40 3300039745 R11 000 04/735
6. SECONDARY SMART CARD READER (optional)
Precaution to be taken prior to opening the cover flap : Disconnect the power supply unit.
To gain access to the secondary smart card reader,
open the secondary reader cover flap.
To insert a smart card into the secondary smart card reader:
• If the smart card introduction slot is not visible, open the secondary reader cover flap as indicated § 5.2,
• Position the smart card with the chip in the position shown in figure above.
• Insert the card fully home into the slot,
• Close the secondary reader cover flap as indicated § 5.5.
To Next Page
Loading...