EasyManua.ls Logo

Sagem Monetel EFTsmart - Eftsmart Characteristics

Sagem Monetel EFTsmart
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTALLATION MANUAL
page 34 / 40 3300039745 R11 000 04/735
13. EFTsmart CHARACTERISTICS
Physical Characteristics
EFTsmart
Mass : approximately 640 g (without paper and cable)
Dimensions : approximately 244 x 124 x 106 mm (L x w x h)
Power supply block
Mass : approximately 230 g (without mains cable)
Dimensions : approximately 98 x 50 x 30 mm (L x w x h)
Cable length
Power block cable : approximately 1,8 m
Mains supply cable : approximately 2 m
Telephone cable : approximately 3 m
Standards
See "EC standard compliance marking" in appendix.
Operating conditions
Class II equipment
Electric supply network : 100-240 V
CA
50-60 Hz
Max consumption : 800 mA RMS
Power block : bi-pole mains supply: 3 A
the power supply unit is specially designed for SAGEM Monetel terminals.
Ambient temperature : from +5°C to +45°C
Max relative humidity. : 85% at +40°C
Serial link: COM, level RS 232 / V28
Serial link: Pin-pad, TTL level
Storage conditions
Storage temperature : -20°C, +55°C
Max relative humidity : 85% at +55°C
Paper reference
In order to benefit from the complete guarantee of the product, only SAGEM Monétel –approved heat-
sensitized paper may be used.