Sagem F@st 1704 User Manual

5 - Information / Configuration
Page 5-116 SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS document. Reproduction and disclosure prohibited
5.10.1.3 Restore Default
Object: This menu is used to return to factory configuration.
Important
The existing configuration is completely overwritten.
• In the Management menu, select Settings then Restore Default.
The following screen opens:
• Click on the Restore Default Settings button; the following screen appears:
• Click on the OK button if you really want to return to the factory configuration.
Note
All the LEDs go off except for the green “WLAN” - if the wired network is
activated; the green POWER LED then all the LEDs and the process for
returning to the factory configuration starts. It lasts for around 2 minutes.
Once the restore performed, the Internet Connection menu appears. Refer to paragraph 5.6.

Sagem F@st 1704 Specifications

General

Brand	Sagem
Model	F@st 1704
Category	Network Router
Language	English