5 - Information / Configuration
Page 5-108 SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS document. Reproduction and disclosure prohibited
5.8.4 Advanced
Object: This menu is used to configure the essential parameters of your wireless network
(WLAN) 802.11 and configure certain security parameters.
• In the Wireless menu, select Advanced.
The following screen opens:
Important
The table below indicates in more detail how to access your Wi-Fi port
(or Access Point).
Nevertheless, it is best to leave the default values for easier usage.
Field Action/Meaning Default value
Band
Select the 2.4 GHz band for the IEEE 802.11g standard.
2.4GHz
Channel
This is the radio channel used by the router and its Wi-Fi
clients to communicate with each other. This channel
must be the same for the router and all its Wi-Fi clients.
Select the channel you want from the scroll down list
(auto, channels 1 to 13).
Note: Channel 11 corresponds to frequency 2462 MHz.
Note: If you select "Auto", the Wi-Fi equipment will
select the access point channel (router) which will
emit the strongest signal.
Conform to the CE Declaration of conformity / Radio rules
list in appendix B to paragraph B.2.
Auto
To Next Page
Loading...
Need help?
General