Sagem F@st 1704 User Manual

Annex A - Troubleshooting
Page A-2 SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS document. Reproduction and disclosure prohibited
A.1 Checking the assignment of an IP address
In Windows Vista, XP, 2000 and ME
1. Click on Start > Run, enter cmd and then click OK.
The command prompt screen appears.
2. Enter ipconfig then press Enter.
3. Check that the entry IP Address contains a value other than 0.0.0.0 (for example
192.168.1.10).
Note
If no IP address is displayed, enter ipconfig /release then enter
ipconfig /renew.
Note
All the troubleshooting procedures described below are undertaken in
Windows® XP. These procedures in other Windows operating systems® (98,
ME and 2000) can be slightly different.
Many sources of information are available to help you identify and resolve issues you may
experience:
• the LEDs on the front panel of the router.
• the HTTP configuration tool.
For step-by-step and advanced problem-solving procedures, use the Diagnostic tool available
in the HTTP configuration tool.

Sagem F@st 1704 Specifications

General

Brand	Sagem
Model	F@st 1704
Category	Network Router
Language	English