Calls 39
Multi-conferencing (*)
(Service depending on the operator)
Multi-conferencing enables you to talk to several callers (depending on the network capacity and on the model).
A multi-conference is limited to 6 participants: 5 in a multi-conference and one additional call
During a call, when pressing the central key, the lefthand key changes function and gives access to different possibilities
of actions with this call.
Standard commands
Sequences of standard keys also permit access to services such as call notification, call holding, multi-conferencing, and
open up additional possibilities:
Reject a call holding or waiting (or multi-conference calls).
End the current call holding or waiting (or the multi-conference calls if there are any) and accept the call (or
multi-conference calls).
End the current call order number X.
Place on hold the current call (or multi-conference calls) and accept the call holding or waiting (or multi-conference
calls).
Place on hold the multi-conference calls except for the current call order number X (private call).
Add a call holding (or multi-conference calls) to the current call (or to the multi-conference).
Place on hold the current call (or the multi-conference calls) and call another phone number.
Note:
If you use this feature, we recommend that you first place the current caller on hold, then dial the new number as a courtesy
to your caller and to ensure privacy with the other party if desired.
End all calls except for a possible call waiting.
R
0
1
1 X
2
2 X
3
Tel. N°
252203635_myH10_en.book Page 39 Vendredi, 12. août 2005 1:32 13
To Next Page
Loading...
Need help?
General
