Sagem MYH10 User Manual

Security 47
Changing the PIN2 number (*)
You have a second PIN number. The procedure for modifying the PIN2 number is identical to that for the PIN number.
Changing the phone code
The phone code is a secret code, intended to protect the phone in the event of theft. It is linked automatically to the SIM card
present on activation.
The
Phone code menu enables you to activate the phone code so that it is requested and checked each time the phone is
switched on, in the case of a different SIM card being used.
If the incorrect code is entered, the time interval between each attempt increases, making use impossible.
To change the phone code, you must first check that it is active (
Control phone code menu).
To activate:
To the question: Phone code? , enter 0000 and validate (press the righthand key ).
Tick the
Phone control box and validate by pressing OK .
To deactivate:
To the question: Phone code? , enter your code (possibly changed) and validate (press the righthand key ).
Do not tick the
Phone control box and validate by pressing OK : it will reset the code to 0000.
Once the phone code is activated, you can modify it:
To the question:
Old phone code? , enter your old phone code and validate (press the righthand key ).
To the question:
New phone code? enter your new phone code (a number of between 4 and 8 digits) and validate by
pressing
OK .
To the question:
Verif. phone code? enter your new phone code a second time to verify it and validate by pressing OK .
Confidentiality messages
The function Confidentiality messages allows you to delete automatically the numbers recorded in the Call Services menu
and the text messages that are in the phone's memory when a new SIM card is inserted. This function is activated/deactivated
in the menu
Confidentiality messages .
252203635_myH10_en.book Page 47 Vendredi, 12. août 2005 1:32 13

Sagem MYH10 Specifications

General

Brand	Sagem
Model	MYH10
Category	Cell Phone
Language	English