EasyManua.ls Logo

SAGEMCOM DS186 HD Freesat - User Manual

SAGEMCOM DS186 HD Freesat
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual
Freesat HD
Digital Satellite TV receiver
DSI86 HD Freesat
UG 253442997-C DSI86 HD Freesat UK.book Page 1 Jeudi, 13. octobre 2011 10:30 10

Questions and Answers

  • R
    Robert MartinAug 13, 2025
    How to fix SAGEMCOM TV Receiver remote control not working?
    • K
      Kristine HallAug 13, 2025
      If the SAGEMCOM TV Receiver remote control isn't working, make sure you're pointing it directly at the receiver. Also, verify the batteries have sufficient life and are correctly inserted.
  • K
    Kayla MartinezAug 16, 2025
    Why TV set does not switch to the SAGEMCOM TV Receiver when it leaves standby mode?
    • J
      Jennifer SmithAug 16, 2025
      If the SAGEMCOM TV set does not switch to the receiver when it leaves standby mode: * Check that your TV set is connected to the TV Scart socket. * If necessary, select the Scart input directly on your TV set.
  • J
    James PeckAug 20, 2025
    What to do if SAGEMCOM TV Receiver cannot find any channels?
    • D
      Darren WeaverAug 20, 2025
      If the SAGEMCOM TV Receiver cannot find any channels: * Check the dish reception. * You should search for programmes. * Contact your satellite installer/dealer for more information on your satellite dish installation and alignment.
  • B
    Brendan BaileyAug 25, 2025
    What to do if SAGEMCOM TV Receiver picture is frozen or unclear?
    • V
      Victoria MatthewsAug 25, 2025
      If the picture on your SAGEMCOM TV Receiver is frozen or unclear, check all the connections and the antenna. You may also need to search for programmes again.
  • M
    Molly BrownAug 27, 2025
    Why is there no sound in HOME CINEMA mode on some channels on my SAGEMCOM TV Receiver?
    • E
      Edward JacksonAug 27, 2025
      If there is no sound in HOME CINEMA mode on some channels with your SAGEMCOM TV Receiver, ensure that the receiver is connected to a HOME CINEMA amplifier using a digital link.
  • C
    Chad HarperSep 1, 2025
    What to do if SAGEMCOM TV Receiver display shows no information?
    • D
      Darren CollinsSep 1, 2025
      If the SAGEMCOM TV Receiver display shows no information, such as time or channel number, try the following: * Switch the receiver on by pressing the On/Off button. * Check all the connections.
  • A
    Anna HowellSep 4, 2025
    What to do if SAGEMCOM TV Receiver displays - -: - - in standby mode?
    • J
      James DavisSep 4, 2025
      If your SAGEMCOM TV Receiver displays - -: - - in standby mode: * Take the receiver out of standby mode by pressing the key. * Check that the satellite signal is correctly detected.
  • H
    Heather SimonSep 8, 2025
    Why is the video black and white on AUX output during VCR/DVD recording on my SAGEMCOM TV Receiver?
    • C
      Christopher WilliamsSep 8, 2025
      If you are experiencing black and white video on AUX output during VCR/DVD recording with your SAGEMCOM TV Receiver, verify that the signal type chosen for AUX Scart output is compatible with your VCR (select PAL on VCR).

Summary

1. Product Overview

Pack Contents

Lists all items included in the receiver package, including the receiver, power unit, remote, and cables.

Front Panel Description

Details the components and indicators located on the front of the digital satellite TV receiver.

Rear Panel Connections

Explains the various input and output connectors found on the back of the receiver.

Remote Control Functions and Batteries

Describes remote control buttons, operation, and battery installation.

2. Safety Recommendations

Receiver Placement Guidelines

Provides instructions on where to position the receiver for optimal operation and safety.

General Safety Warnings

Outlines critical safety precautions to avoid electric shock, fire, and damage to the unit.

3. Environmental Considerations

Product and Packaging Logos

Explains the meaning of various eco-labels and symbols found on the product and its packaging.

Product Recycling and Disposal

Guides users on the proper methods for recycling and disposing of the product and its components.

WEEE and RoHS Directives

Details European directives concerning waste electrical equipment and hazardous substances.

Reducing Electrical Consumption

Offers recommendations on how to minimize the receiver's power consumption.

4. Connections

Satellite Dish Connection Setup

Explains how to connect the satellite dish cable to the receiver's input.

High-Definition TV via HDMI

Details the procedure for connecting the receiver to an HD television using an HDMI cable.

Standard-Definition TV via Scart

Describes how to connect the receiver to a standard-definition TV using a Scart cable.

VCR;DVD Recorder Connectivity

Illustrates how to connect the receiver to a VCR or DVD recorder for recording purposes.

Home Cinema Audio Connection

Guides on connecting the receiver to a home cinema system for enhanced audio.

Hi-Fi System Audio Link

Explains how to connect the receiver's audio outputs to a hi-fi system.

5. First Installation

Initial Setup and Freesat Settings

Guides through the initial setup process, including satellite signal detection and postcode entry.

Configuring Main Settings

Allows users to adjust preferred audio, screen size, and HDMI resolution during initial setup.

Automatic Channel Scanning

Describes the automatic process of searching for and tuning available Freesat TV and radio channels.

6. Everyday Use

Channel Selection Methods

Explains methods for changing channels using the remote control and the channel list.

Programme Information Banner

Details how to display and interpret the on-screen information about current programmes.

Accessing Detailed Programme Info

Shows how to access extended information for current and upcoming programmes.

Volume Control and Muting

Explains how to control the volume and use the mute function.

Managing Favourite Channel Lists

Guides on creating and switching between custom lists of favorite channels.

Temporary Audio;Subtitle Selection

Describes how to temporarily select different audio tracks and subtitle options.

Teletext and Interactive Services

Explains how to access teletext and interactive broadcast services.

Electronic Programme Guide (EPG)

Introduces the EPG for viewing programme schedules and information.

EPG Navigation and Actions

Details how to navigate the EPG, select programmes, and view extended information.

7. Recording Programmes

Manual Recording Setup Guide

Provides step-by-step instructions for manually scheduling recordings on a VCR/DVD recorder.

EPG Programme Recording Procedure

Explains how to schedule recordings directly from the Electronic Programme Guide.

8. Installation Menus

User Settings: Language Preferences

Guides users on selecting preferred audio and subtitle languages.

Parental Controls and Channel Management

Covers locking programmes, hiding channels, managing favourites, and changing parental codes.

Receiver Settings

Performing a Channel Search

Explains how to perform a channel search using your postcode to find available Freesat channels.

Picture Settings Adjustments

Guides on adjusting TV screen size, resizing, and OSD display time.

Lip Sync Audio Delay

Explains how to adjust the audio delay to synchronize sound with video.

Video Output Configuration

Covers HDMI resolution and TV SCART video standard settings.

Receiver Software Upgrade Process

Details how to check for and perform software updates for the receiver.

Performing a Factory Reset

Explains how to reset the receiver to its default factory settings.

Manual Channel Entry Guide

Guides on manually adding non-Freesat channels by entering transponder parameters.

9. Information Menu

Signal Information Display

Shows signal strength and quality for the currently watched programme.

Receiver Software Details

Provides details about the receiver's hardware and embedded software version.

10. Software Update

Automatic Software Download Process

Explains the process of automatic software checks and downloads for the receiver.

11. Troubleshooting

12. Customer Support

13. Guarantee Terms

Guarantee Application Procedure

Explains how to apply for the guarantee and the required proof of purchase.

Guarantee Exclusion Clauses

Lists conditions and situations that are not covered by the product's guarantee.

14. Technical Specifications

Key Technical Data

Lists transmission, decoding, audio, and output format specifications.

Hardware, Power, and Accessories

Details ports, panel features, power consumption, physical specs, and included accessories.

SAGEMCOM DS186 HD Freesat Specifications

General IconGeneral
HD SupportYes
Tuner TypeDVB-S2
Video OutputHDMI, SCART
ResolutionUp to 1080i
ConnectivityEthernet
USB PortYes
EPGYes
Parental ControlYes
TypeFreesat
Video Resolution720p, 1080i
Audio OutputHDMI, Optical
Recording FunctionalityYes (with external storage)

Related product manuals