DTR94 HD freesat
Getting started
13
4. Connections
Before installing your recorder, please check that:
• the delivery is complete (see Product overview, page 4),
• please make sure the appliances to be connected (recorder, TV, VCR…) are unplugged before
making any connections.
Connection to the satellite dish
To get all the freesat HD and SD channels, make sure that your satellite dish is oriented towards
ASTRA 2, facing 28.2° East.
To fully enjoy the recording and timeshifting features of your recorder, you must connect the 2
satellite tuners, making sure that:
• your 2 satellite signal inputs are fully independent. This implies that you use 2 distinct LNB heads
(i.e. twin LNB-head aerial). The use of a splitter is excluded.
• your 2 LNB heads are both directed towards ASTRA 2, facing 28.2° East.
Contact your satellite installer/dealer for more information on your satellite dish installation and
alignment.
1. Plug the first satellite dish cable into the IN 1 input connector on your recorder.
2. Plug the second satellite dish cable into the IN 2 input connector on your recorder.
UG 253443006-C DTR94 HD Freesat UK.book Page 13 Jeudi, 13. octobre 2011 11:25 11
To Next Page
Loading...
Need help?
General
