WPS PBC (Push Button Configuration):
(1) Press the WPS button on your AP.
(2) Select WPS PBC on the menu within the time limit (AP dependent) to
establish a connection.
(1) Press the Wheel to select the AP list menu.
(2) Select a desired network from the list.
Note: If you have selected a network with a lock icon at the front, you must
enter the password for the selected network.
On the text entering screen, rotate the Wheel to choose the characters or
numbers from the list at the bottom of the screen. Press the Wheel to select
the character.
Rotate the Wheel to select End to quit the edit screen and start connecting to
the network.
AP List
WPS
The IP Radio supports WPS (WiFi Protected Setup). If your AP supports WPS
as well, you can choose this network connecting method.
To Next Page
Loading...
Need help?
General