SAGEMCOM RM50 - Time Zone Configuration

15
Getting Started
After the Network, Language and Time Zone settings are set, the menu screen
will be displayed.
After scanning, if no network connection is found, a network error message
appears for a few seconds and then the Network Config. menu will be
displayed.
Please refer to Setup
→
Network Config. section in the
manual for more details.
Select your time zone in the device to synchronize the date and time with the
Internet. The device will automatically set up the local Time one.
Choose YES to confirm the Time zone selection.
(1) Choose NO to continue the Time zone setting.
(2) Rotate the Wheel to choose your time zone.
(3) Press the Wheel to activate the setting.
Time Zone
2.1.5 If The Network Is Not Found