MAX QUICK START GUIDE 11
STEP 1D:
CONNECT MAX
TO THE INTERNET
You can set up an internet connection via WiFi (explained on this page) or
Bluetooth (explained on page 12). Go to Menu > System > Connection >
and choose one of the two connections.
OPTION ONE: CONNECT VIA WIFI
1. Select the WiFi network you want to connect to
2. Set the password
- Choose your charset (go to the next charset by holding the right top
button or go to the previous charset by holding the left top button)
- Are you on your desired charset? Choose the character (go to the
next character by pressing the right top button)
- Are you on the desired character? Save the character (press the right
side button) or delete the character (press the left side button)
3. Are you done with the full password?
Connect to the network (click on the top middle button).
The MAX will tell you if the password is correct and the connection
is successful. If you want to leave this password setup earlier, make
sure to delete all characters first before pressing exit.
Please check if your MAX is online.
Go to Menu > System > System Info > Communication
To Next Page
Loading...