12
Calling a SHORE Station
Press Tx CALL
You first see the messages “Call in progress” and then “Waiting for
acknowledgement”
Wait for answer
If the coast station answers see page 8 Receiving an Individual DSC call.
If the SHORE station supports the possibility of including
a telephone number, the telephone number can be keyed
in followed by ACCEPT.
Select SEND to transmit
the call.
Select send to transmit SEND
TYPE: Individual
TO : LYNGBY
AD.: No info
ACKN: Request CANCEL
Select DSC frequency ACCEPT
CANCEL
Rx 8049.0 kHz
Tx 8049.0 kHz
Select the frequency on
which the call is transmit-
ted.
Select ACCEPT to make a call directly to the shore station and talk with a
person there if no phone number is keyed in.
Select TEST CALL to make a test call to the coast station.
Key in the ACCEPT
phone number
<
TYPE: Individual TEST CALL
TO : LYNGBY
_ CANCEL
Accept the number.
A sub menu where a preprogrammed station can be selected.
Key in the coast ACCEPT
station MMSI number
<
MEMORY
TYPE: Individual
TO : 002191000 CANCEL
Select a SHORE call.
Select type
of call:
SHORE
SHIP
DISTRESS
MORE
Key in the nine digit MMSI number of the wanted coast station.
Note that when calling a coast station, it is always the
coast status that selects the working frequency for the
following communication.
To Next Page
Loading...