3
Basic Functions
Switching ON/OFF
1. Press the ON/OFF button.
Setting Backlight Level
1. Press the Shift key followed by the DIM key.
The backlight is changed from zero to maximum in four steps.
Repeat until the desired setting is reached.
Switching Loudspeaker ON/OFF
1. Press the Shift key followed by the SPK key.
Volume Control
1. Rotate the VOL button to adjust the loudspeaker sound volume.
Switching Squelch ON/OFF
(SSB Telephony mode)
1. Press the Shift key followed by the Squelch key.
When squelch is ON, the receiver output is muted in speech pauses.
Setting Transmitter Power Level
1. Press the Shift key followed by the Power Key.
The output power is set to HIGH, MED or LOW.
Repeat until the desired setting is reached.