Sainlogic WS0310 - Setup the Display Console

- 10 -
1. Outdoor temperature
display
2. WIFI network
3. Outdoor humidity display
4. Outdoor humidity HI/LO
alarm icon
5. Min/Max reset for 24h icon
6. Weather forecast
7.Rainfall display(RATE, 24h,
WEEK,MONTH, TOTAL)
8. Rainfall units of measure
9. Date display
10. Time alarm icon
11. Time and Year
12. UV Index display
13. Sunshine intensity
14. MOON phase
15. Sunlight units of measure
16. Indoor Dew point display
17. Indoor Dew point ICON
18. Indoor temperature and
humidity display
19. Pressure (REL and ABS)
display
20. Pressure units of measure
21. Wind speed average
display
22.Wind gust display
23.Wind speed units of
measure
24.Wind chill and feels like
HI/Lo alarm icon
25. Wind direction
26. OUT dew point and
AT(Apparent Temperature)
display icon
27. Integrated outdoor
transmitter Low power
indicator
28.Temperature units (°F
or °C)
29.Outdoor temperature
HI/LO alarm icon
3.4.2 Setup the Display Console
1. Plug in the display console with power adapter.
BL ON will display in the time area for three seconds when
powered up. Conversely, The AC OFF icon will display .
Note: It is recommended to plug in the power adapter to
reduce the battery consumption and extend the service life