Sainlogic FT-0310 User Manual

43 pages

To Next Page

FT-0310 Professional WIFI Weather Station

User Manual

1.Introduction

Thank you for your purchase of the FT0310 Professional WIFI Wireless Weather station.

The following user guide provides step by step instructions for installation, operation, and

troubleshooting.

2.Warnings

Warning: Any metal object may attract a lightning strike, including your weather sta-

tion mounting pole. Never install the weather station in a storm.

Warning: Installing your weather station in a high location may result in injury or

death. Perform as much of the initial check out and operation.

3.Getting Started

The FT0310 weather station consists of a display console (receiver), a sensor array with

Integrated Outdoor Transmitter and mounting hardware.

Parts List

The FT0310 weather station consists of the following parts (as referenced in Figure 1 ).

QTY

Item

Image

Display Console

Frame Dimensions (Lx H x W):

215X22X158mm

LCD Dimensions (L x W): 170 x 125mm

Integrated Outdoor Transmitter

Dimensions (L x H x W)：

330x150x280mm

Questions and Answers:

C
Cameron CaseyAug 7, 2025
What to do if WiFi does not display on Sainlogic FT-0310 console?
- A
  Angel CoxAug 7, 2025
  If the WiFi is not displaying on your Sainlogic Weather Station console, consider these troubleshooting steps: 1. Check the WiFi symbol on the display. If wireless connectivity is successful the WiFi icon will be displayed in the time field. 2. Verify your router's WiFi settings (network name and password) are correct. 3. Ensure the console is plugged into AC power, as it won't connect to WiFi on battery power alone. 4. Confirm your router is a 2.4 GHz router, as the console only supports this frequency. If you have a dual-band router, disable the 5 GHz band and enable the 2.4 GHz band. 5. The console does not support guest networks.
R
Robert HayesAug 12, 2025
Why is Sainlogic FT-0310 data not reporting to Wunderground or Weathercloud?
- D
  Denise FryeAug 12, 2025
  If your Sainlogic Weather Station data isn't reporting to Wunderground.com or Weathercloud.net, check the following: 1. Make sure your password or key is correct. It is the password you registered on Wunderground.com. Your Wunderground.com password cannot begin with a non-alphanumeric character (a limitation of Wunderground.com, not the station). Example, $worknet is not a valid password, but worknet$ is valid. 2. Confirm your station ID is correct. 3. Verify the date and time are correct on the console. Incorrect settings can cause old data to be reported instead of real-time data. 4. Ensure your time zone is set properly to avoid reporting old data. 5. Check your router's firewall settings, as the console sends data via Port 80.

Sainlogic FT-0310 Specifications

General

Model Number	FT-0310
Category	Weather Station
Brand	Sainlogic
Display	LCD
Rainfall Range	0 to 9999mm
Power (Remote Sensor)	2 x AA batteries
Rain Gauge	Yes
Wireless Transmission	433MHz
Alarm Function	Yes
Wireless Range	100m
Temperature Range (Indoor)	0°C to 50°C
Wind Speed Range	0 to 50 m/s
Power (Base Station)	3 x AA batteries
Update Rate (Outdoor Sensors)	60 seconds
Power Supply	Batteries or AC adapter
Data Storage	Yes
Forecast	Yes