EasyManua.ls Logo

Sainlogic FT0073 - User Manual

Sainlogic FT0073
33 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Sainlogic
Benutzerhandbuch für FT0073, drahtloser
Innen-/Außen-Thermo-Hygrometer mit 8 Kanälen
und drei Fernanzeigen
1. Einleitung
Vielen Dank , dass Sie sich für den Kauf des FT0073, dem drahtlosen
Innen-/Außen-Thermo-Hygrometer mit 8 Kanälen und drei
Fernanzeigen entschieden haben. Die folgende Anleitung wird Ihnen
Schritt für Schritt die Installation, die Anwendung und die Fehlersuche
erklären.
2. Erste Schritte
Hinweis: Das Einschalten muss in der in diesem Abschnitt genannten
Reihenfolge durchgeführt werden (legen Sie die Batterie zuerst in
den/die Außensender ein, dann in die Displaykonsole).
Die FT0073 Wetterstation besteht aus einer Displaykonsole
(Empfänger) und drei Thermo-Hygrometern (Außensender).
2.1 Geräteliste
2.2 Empfohlene Werkzeuge
Hammer und Nagel zum Aufhängen der Thermo-Hygrometer
Außensender.
1
3
-1-
1
ANZAHL
Artikel
Displaykonsole
Frame-Größe (B x H x T): 11,5 x 12,5 x 2,25 cm
LCD Abmessungen (L x B): 9.5 x 8.0cm
3 Thermo-Hygrometer Sender (FT007TH)
Abmessungen (B x H x T): 11 x 4,5 x 2,0 cm
Handbuch

Table of Contents

Questions and Answers

  • J
    Jon RiveraAug 10, 2025
    What to do if Sainlogic Weather Station shows dashes on the display console?
    • S
      Seth HamiltonAug 10, 2025
      If your Sainlogic Weather Station displays dashes, it indicates that the remote sensors are not transmitting correctly. This can happen if there are obstructions like solid metal (which acts as an RF shield) or earth barriers (like hills) between the sensor and the console. Ensure the remote sensors are not transmitting through these obstructions. Additionally, try moving the display console away from devices that generate electrical noise, such as computers, TVs, and other wireless transmitters. You might also need to move the remote sensor to a higher or closer location.
  • T
    timothy60Aug 15, 2025
    Why is my Sainlogic FT0073 Weather Station wireless remote not reporting to the console?
    • J
      Jennifer BurnsAug 15, 2025
      If the wireless remote of your Sainlogic Weather Station isn't reporting to the console, try these steps: First, move the sensor closer to the display console. Next, check that the remote sensor's LCD is working and that its transmitter light flashes every 60 seconds. If not, install a fresh set of batteries in the remote thermo.
  • C
    cassandrahaneyAug 20, 2025
    What to do if Sainlogic FT0073 Weather Station indoor and outdoor temperature do not agree?
    • P
      paynejessicaAug 20, 2025
      If the indoor and outdoor temperature readings on your Sainlogic Weather Station don't match, keep in mind that the sensors should agree within 2 °C, as the sensor accuracy is ± 1 °C. Allow up to one hour for the sensors to stabilize due to signal filtering. If the discrepancy persists, use the calibration feature to match the indoor and outdoor temperature to a known source.
  • H
    howardjeremyAug 25, 2025
    What to do if Sainlogic FT0073 temperature sensor reads too high?
    • K
      kyle04Aug 26, 2025
      If your Sainlogic Weather Station's temperature sensor reads too high during the day, ensure that the thermo-hygrometer is mounted in a shaded area on a north-facing wall.
  • D
    Diane CunninghamAug 30, 2025
    What to do if Sainlogic FT0073 Weather Station indoor and outdoor humidity do not agree?
    • J
      James TurnerAug 30, 2025
      If the indoor and outdoor humidity readings on your Sainlogic Weather Station are inconsistent, remember that the sensors should agree within 10 %, given a sensor accuracy of ± 5 %. Allow the sensors to stabilize for up to one hour due to signal filtering. If differences remain, use the calibration feature to align the indoor and outdoor humidity to a known, reliable source.
  • C
    chanpeterSep 4, 2025
    How to fix weak display console contrast on Sainlogic FT0073 Weather Station?
    • A
      Anthony HornSep 4, 2025
      If the display console contrast on your Sainlogic Weather Station is weak, replace the console batteries with a fresh set.

Sainlogic FT0073 Specifications

General IconGeneral
BrandSainlogic
Model NumberFT0073
CategoryWeather Station
TypeWireless
DisplayLCD
Indoor Temperature Range0°C to 50°C
Rainfall Measurement/DisplayYes
Barometric Pressure MeasurementYes
Weather ForecastYes
Alarm FunctionYes
Memory FunctionYes
BacklightYes
Power SupplyAC adapter or batteries
Wind Speed0 to 50 m/s
Wireless Range100 meters
Power Source (Base Station)AC adapter
Power Source (Remote Sensor)2 x AA batteries
Power Source (Indoor unit)batteries

Related product manuals