To Next PageTo Next PageWhat to do if indoor and outdoor humidity readings don't agree on Sainlogic WS-0835 Weather Station?
If the indoor and outdoor humidity readings on your Sainlogic Weather Station are not the same, allow up to one hour for the sensors to stabilize due to signal filtering. If they still disagree after this time, use the calibration feature to align the indoor and outdoor humidity readings to a known, reliable source.
How to fix Sainlogic WS-0835 when wireless remote is not reporting?
If the Sainlogic Weather Station's wireless remote is not reporting to the console and dashes are displayed, it could be due to a loss of sensor communication. To reacquire the signal, press and hold the CHANNEL/+ button for 3 seconds until the remote search icon appears. Once the signal is reacquired, the icon will disappear, and the current values will be displayed. Also, ensure that the sensor assembly is not too close to the display console (less than 1.5m). If it is, move it further away. If it is not close enough, move the sensor assembly closer to the display console.
Why does my Sainlogic WS-0835 Weather Station show different indoor and outdoor temperatures?
If the indoor and outdoor temperatures on your Sainlogic Weather Station do not match, allow up to one hour for the sensors to stabilize due to signal filtering. If the issue persists, use the calibration feature to match the indoor and outdoor temperature to a known source.
Why is the display console contrast weak on my Sainlogic Weather Station?
If the display console contrast on your Sainlogic Weather Station is weak, replace the console batteries with a fresh set of batteries.
Lists all the components included with the WS-0835 weather station.
Lists essential tools required for the weather station setup.
Explains the initial setup steps for the outdoor sensor array.
Recommends operating the station temporarily for functional checks.
Guides on performing a site survey for optimal sensor placement.
Offers tips for ensuring reliable wireless communication.
Instructions for calibrating wind direction in the Northern Hemisphere.
Instructions for installing the sensor in the Southern Hemisphere.
Describes how to navigate through different display modes on the console.
Details how to enter and configure settings in the console.
Explains how to reacquire lost sensor signals.
Instructions for clearing minimum and maximum recorded values.
How to silence alarms using the snooze function.
Explains operation and adjustment of the console backlight.
How alarms are indicated and silenced.
How to view current high and low alarm settings.
Step-by-step guide to configuring alarm parameters.
How to enable or disable audible beeps for alarms and key presses.
Explains the basis and limitations of the weather forecasting feature.
Describes the meaning of various weather condition icons displayed.
Displays the different phases of the moon shown on the console.
How to adjust the pressure threshold for weather forecast sensitivity.
Explains the "Feels Like" temperature calculation using Heat Index/Wind Chill.
Details wireless transmission range, frequency, and interval.
Provides range, accuracy, and resolution for measured parameters.
General| Brand | Sainlogic |
|---|---|
| Model | WS-0835 |
| Category | Weather Station |
| Language | English |
