Sainlogic WS-0835 - 3.2 Recommend Tools; 3.3 Sensor Assembly Set Up

3
Figure 1
3.2 Recommend Tools
 Precision screwdriver (for small Phillips screws)

Compass or GPS (for wind direction calibration)
 Adjustable Wrench
 Hammer and nail for Foot Mounting.
3.3 Sensor Assembly Set Up
The following illustration shows the full segment for Thermo-
Hygrometer ,WIND and RAIN transmitter .purposes only ,as shown in
Figure 2.
4
Tapping screws
1
Manual
1
Power Adapter