Indoor Temperature
Indoor Humidity
8.1 Alarm Operation
When an alarm condition is exceeded, the alarm icon will flash
(visual) and the alarm beeper will sound (audible). To silence the
beeper, press any key.
8.2 Viewing the High and Low Alarms
To view the current alarm settings, press the ALARM key to enter the
alarm mode. HI will be displayed in the time area. At the same time
Alarm time parameters of out/indoor temperature/humidity, rain, feels
like, wind gust, wind average, and dew point are displayed.
Press ALARM key again to view the LOW alarms along with the alarm
clock time the same way HI alarms.
Press the SNOOZE key at any time to return to the normal mode.
8.3 Setting the Alarms
Press ALARM key to enter the alarm mode.
Next, Press and hold the SET key for three seconds. The first alarm
parameter will begin flashing (alarm hour).
To save the alarm setting and proceed to the next alarm parameter,
press(do not hold) the SET key.
To adjust the alarm parameter, Touch the [+] or [-] key to increase or
decrease the alarm settings, or Touch and hold the [+] or [-] key for
three seconds to increase or decrease the alarm settings rapidly.
Press the ALARM key to turn on (the alarm icon will appear ) and off the
alarm.
Press the SNOOZE key once at any time to return to the normal mode.
After 30 seconds of inactivity, the alarm mode will time out and return to
normal mode.
The following is a list of the individual alarm parameters that are set (in
order):
To Next Page
Loading...
