Southern Hemisphere(SOU).(refer to 5.0 Final Installation of
Integrated outdoor transmitter)
7.3 Sensor Search Mode
If outdoor sensor loses communication, dashes (--.-) will be displayed.
To reacquire the lost signal, press and hold the CH/+ button for 3
seconds to enter the sensor search mode.
7.4 Reset Min/Max record
Note: The minimum and maximum value of all channels will be
cleared in the reset mode.
In normal mode, Press (do not hold) the MIN/MAX/-key, and the MAX
icon will be displayed. Press the SET key to view rainfall (1h, 24h, week
or month) , pressure (ABS or REL) max value ,outdoor temperature
(temperature, dew point or feels like).
Next, press and hold the MIN/MAX/- key for three seconds(and the
CLR character is flashing in time area) to clear the rainfall, wind speed,
wind gust, pressure, temperature and humidity maximum values. The
maximum values will now display the current values.
Press the MIN/MAX/- key again (do not hold), and the MIN icon will be
displayed. Press the SET key to view pressure (ABS or REL) min value,
pressure (ABS or REL) min value ,outdoor temperature (temperature,
dew point or feels like).
Next, Press and hold the MIN/MAX/- key for three seconds(and the
CLR character is flashing in time area) to clear the pressure,
temperature and humidity minimum values. The minimum values will
now display the current values.
Press the SNOOZE key to exit the min/max checking and cleaning
mode, return to normal display mode.
7.5 Snooze Mode
If the alarm sounds, and you wish to silence the alarm, press the
SNOOZE key, the backlight will turn on. The alarm icon will continue to
flash and the alarm will silence for five minute. press any key
To Next Page
Loading...
