4. Date Format (default: MM-DD): Press the SET key again to enter
the day/month format mode. Press the [+] key to switch between M-
D, D-M.
5. Change Month. Press the SET key again to set the calendar month.
Press the [+] key or [-] key to adjust the calendar month.
6. Change Day. Press the SET key again to set the calendar day.
Press the [+] key or [-] key to adjust the calendar day.
7. Change Year. Press the SET key again to set the calendar year.
Press the [+] key or [-] key to adjust the calendar year.
8. Max/Min Clearing (default: ON). Press the SET key again to set
the max/min clearing mode (CLR). The Max/Min can be
programmed to clear daily (at midnight) or manually. Press the [+]
key or [-] key to switch between “Clears 24h” and Clears Manually.
9. Temperature Units of Measure (default: °C):. Press the SET key
again to change the temperature units of measure (the UNITSET
icon will be displayed). Press the [+] key or [-] key to switch
between °F and °C units of measure.
10. Wind Speed Units of Measure (default: m/s). Touch the SET key
again to change the wind speed units of measure . Touch the [+]
key or [-] key to toggle the wind speed units between
m/s,bft,knots,mph or bft.
11. Rainfall Units of Measure (default: mm). Touch the SET key
again to change the Rainfall units of measure. Touch [+] key or [-]
key to toggle the rainfall units between mm and inch.
12. Barometric Pressure Display Units(default: hPa). Press the SET
key again to change the pressure units of measure. Press the [+]
key or [-] key to toggle the pressure units between mmHg, inHg or
hPa.
13. Pressure Threshold Setting (default level 2). Press the SET key
again adjust the Pressure threshold setting. Press [+] key or [-] key
to adjust the pressure threshold setting up or down.
14. Weather Forecast Icon Setting (default: partly cloudy). Press
the SET key again to set the weather forecast icon initial conditions
(based on the current weather conditions). Press the [+] key or [-]
key to toggle weather icons between sunny, partly cloudy, cloudy,
or rainy.
15. Location division.(default: Northern Hemisphere) Press the
SETkey again to change the location division. Press the [+] key or [-]
key to toggle the sunlight units Northern Hemisphere (NOR)or
To Next Page
Loading...
