While in Normal Mode, press (do not hold) the SET key to enter the
Quick Display Mode as follows:
once for time/second/date, time/week/date and time/week/year
twice for rainfull.
three for pressure
four for outdoor dew point temperature
1. Time, Time/Week and Date. Press the CHANNEL/+ or MIN/MAX/-
key to toggle between time/second/date, time/week/date and
time/week/year.
2. Rainfall. Press the CHANNEL/+ or MIN/MAX/- key to toggle
between 1h, 24h, week, month and total.
To clear the total rain, press the CHANNEL/+ or MIN/MAX/- button until
total rain is displayed. The total rain will flash. Press and hold the SET
button for three seconds until total rain reads 0.0.
3. Absolute Pressure and Relative Pressure. Press the CHANNEL/+
or MIN/MAX/- key to toggle between absolute pressure and relative
pressure.
4. Outdoor dew point .Press the CHANNEL/+ or MIN/MAX/- key to
toggle between temperature, dew point and feels like
7.2 Set (Program) Mode
While in Normal Mode, Press and hold the SET key for at least three
seconds to enter the Set Mode. The first setting will begin flashing. You
can press the SET key again to skip any step, as defined below.
Note: In the Set mode, press the [+] key or [-] key to change or
scroll the value. Hold the [+] key or [-] key for three seconds to
increase/decrease rapidly.
Note: To exit the Set mode at any time, press the SNOOZE button
of the display console.
1. 12/24 Hour Format (default: 24h):.Press the SET key again to
adjust the 12/24 hour format setting (FMT). Press the [+] key or [-]
key to change between 12 hour and 24 hour format.
2. Change Hour. press the SET key again to set the hour. Press the
[+] key or [-] key to adjust the hour up or down. Note the PM icon is
present during afternoon hours.
3. Change Minute. Press the SET key again to set the minute. Press
the [+] key or [-] key to adjust the minute up or down.
To Next Page
Loading...
