To Next PageTo Next PageWhy do indoor and outdoor humidity readings not agree on my Sainlogic FT0835?
If the indoor and outdoor humidity readings on your Sainlogic Weather Station disagree, allow up to one hour for the sensors to stabilize due to signal filtering. The humidity sensors should agree within 10% (sensor accuracy is ± 5%). You can also use the calibration feature to match the indoor and outdoor humidity to a known, reliable source.
What to do if indoor and outdoor temperature readings don't agree on Sainlogic Weather Station?
If the indoor and outdoor temperature readings on your Sainlogic Weather Station do not match, allow up to one hour for the sensors to stabilize due to signal filtering. The temperature sensors should agree within 2 °C (the sensor accuracy is ± 1 °C). If discrepancies persist, use the calibration feature to align the indoor and outdoor temperatures to a known, reliable source.
How to improve display console contrast on Sainlogic Weather Station?
If the display console contrast on your Sainlogic Weather Station is weak, replace the console batteries with a fresh set.
How to fix Sainlogic FT0835 when wireless remote is not reporting and shows dashes?
If your Sainlogic Weather Station console displays dashes (--.-), it indicates a loss of sensor communication. To restore the signal, press and hold the CHANNEL/+ button for 3 seconds until the remote search icon appears. When the signal is reacquired, the icon will disappear, and current values will be displayed. Ensure the sensor is within the communication range (100 m line of sight, 30 m under most conditions). Try these steps: * Move the sensor closer to the console, but not less than 1.5m away. * Verify the remote sensor LCD is working and the transmitter light flashes every 60 seconds. * Install new batteries, using lithium batteries for cold environments. * Ensure the sensor isn't transmitting through metal or earth barriers. * Move the console away from electrical devic...
Covers lightning strike risks and installation safety for elevated locations.
Lists the FT0835 weather station components and their dimensions.
Lists essential tools for setup and calibration, like screwdrivers and wrenches.
Details the setup process for the Thermo-Hygrometer, WIND, and RAIN transmitter.
Explains the layout and indicators of the full segment LCD display.
Guides on powering the console, inserting batteries, and initial display of data.
Recommends operating the station for a week in a temporary location before permanent installation.
Advises on site selection, considering obstructions, heat transfer, and wind/rain accuracy.
Provides recommendations for optimal wireless signal, covering EMI, RFI, and barriers.
Details wind direction calibration and console setting for Northern Hemisphere.
Details solar panel orientation and console setting for Southern Hemisphere.
Covers switching to simplified display and configuring various settings like time, date, and units.
Explains sensor search, data reset, alarm snooze, and backlight functions.
Guides on how alarms trigger, silencing, viewing, and setting high/low thresholds.
Details how to enable or disable audible beeps for alarms and key presses.
Explains how barometric pressure changes predict future weather conditions and the meaning of display icons.
Covers display of moon phases and adjustment of pressure sensitivity for weather forecasts.
Details wireless transmission, measurement accuracy, range, and resolution for key parameters.
Outlines battery requirements and expected battery life for the console and transmitter.
General| Brand | Sainlogic |
|---|---|
| Model Number | FT0835 |
| Category | Weather Station |
| Wireless Range | Up to 100 meters |
| Transmission Frequency | 433 MHz |
| Temperature Range (Indoor) | 0°C to 50°C |
| Temperature Range (Outdoor) | -40°C to 60°C |
| Humidity Range | 10% to 99% |
| Rainfall Range | 0 to 9999 mm |
| Wind Speed Range | 0 to 50 m/s |
| Wind Direction | 0° to 360° |
| Power (Base Station) | 5V DC Adapter |
| Memory Function | Yes |
| Alarm Function | Yes |
| Backlight | Yes |
| Display | LCD |
| Update Interval (Outdoor Sensors) | 16 seconds |
| Battery Type | AA |
| Weather Parameters | Temperature, Humidity, Wind Speed, Wind Direction, Rainfall |
| Mounting Type | Wall Mountable |
